Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › E32900T30D Only Transmitting on 866MHz › Reply To: E32900T30D Only Transmitting on 866MHz
22 January 2026 at 02:39
#34452
This sounds like a hardware variant issue rather than a config problem—the E32-900T30D with band code 32 is factory-locked to the 868 MHz band, so you can’t switch it to 915 MHz via software or firmware and would need the 915 MHz version of the module instead.
______________________
Precision in motion, powered by servo motor technology.
-
This reply was modified 3 days, 8 hours ago by
samlevy0515.


