<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-WMJSQ8K" height="0" width="0" style="display:none;visibility:hidden"></iframe>

ABB Aurora Monitor upload/flash pre compiled file

This topic has 2 replies, 1 voice, and was last updated 3 years, 3 months ago by Renzo Mischianti.

Viewing 2 reply threads

Author

Posts
- 23 May 2021 at 11:07 #12342
  kriss
  I could ask you to put the ready batch into the processor under ESP8266Flasher. I can’t cope with installing libraries. I like the idea very much. I have the same AURORA inverter.
- 23 May 2021 at 23:24 #12345
  Renzo Mischianti
  Keymaster
  Hi Kriss,
  I use esptool to upload, and i use this command
  
  esptool.exe -cd nodemcu -cb 921600 -cp COM17 -ca 0x00000 -cf Aurora_Web_Inverter_Monitor_242.bin
  
  use the version with ftp and upload the data files (html files), then I think It’s better if you put the version without ftp so you free some resources.
  
  bye Renzo
  
  Attachments:
  You must be logged in to view attached files.
- 15 September 2021 at 09:22 #14500
  Renzo Mischianti
  Keymaster
  Finally you can find precompiled files and instruction on this article
  ABB Aurora Web Inverter Monitor (WIM): upload the sketch and front end – 9
  
  Bye Renzo
Author

Posts

Viewing 2 reply threads

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!