arduino not sends data

Tagged: Arduino, lora

This topic has 2 replies, 2 voices, and was last updated 1 year, 2 months ago by Renzo Mischianti.

Viewing 2 reply threads

Author

Posts
- 6 September 2023 at 20:29 #27316
  Nadjiba
  Participant
  hello i have a problem i am new to this. but I connected everything as shown in the article https://mischianti.org/ebyte-lora-e22-device-for-arduino-esp32-or-esp8266-power-saving-wor-and-structured-data-5/#Send_complex_structure. downloaded the library to check I have arduino mega and arduino uno . i want to transfer any message from one to another using the examples of the library is sendbroadcastmessage and receive message in the serial monitor writes that
  No response from device! (Check wiring)
  12
  —————————————-
  HEAD : 0 0 6A
  
  AddH : 6A
  AddL : 6A
  Net ID : A
  
  Chan: 0 -> 410MHz
  
  SpeedParityBit : 0 -> 8N1 (Default)
  SpeedUARTDatte : 0 -> 1200bps
  SpeedAirDataRate : 0 -> 0.3kbps
  
  OptionSubPacketSett: 0 -> 240bytes (default)
  OptionTranPower : 11 -> 10dBm
  OptionRSSIAmbientNo: 0 -> Disabled (default)
  
  TransModeWORPeriod : 0 -> 500ms
  TransModeTransContr: 0 -> WOR Receiver (default)
  TransModeEnableLBT : 0 -> Disabled (default)
  TransModeEnableRSSI: 0 -> Disabled (default)
  TransModeEnabRepeat: 0 -> Disabled (default)
  TransModeFixedTrans: 0 -> Transparent transmission (default)
  —————————————-
  Hi, I’m going to send a message!
  success
  what is the problem?
- 8 September 2023 at 17:13 #27369
  Renzo Mischianti
  Keymaster
  Hi Nadjiba,
  first of all, add the connection to AUX so we can check if It’s correctly changed.
  Then check the wiring and the power supply if It’s sufficient.
  Bye Renzo
- 8 September 2023 at 17:15 #27370
  Renzo Mischianti
  Keymaster
  Hi Nadjiba,
  first of all, add the connection to AUX so we can check if It’s correctly changed.
  Then check the wiring and the power supply if It’s sufficient.
  Bye Renzo
Author

Posts