BeePrint and MKS WiFi Firmware releases with ChangeLog

[Renzo Mischianti]

Here I add all the changelog of BeePrint and MKS WiFi firmware

• BeePrint 1.6.1 MKS WiFi 1.3 Minor fix on Portuguese language and firmware compiled with double MHz (from 80MHz to 160Mhz) for better performance
• 2023-02-04 BeePrint 1.6 MKS WiFi 1.2 Add Portuguese language (thanks Ronaldo Risso), remaining time and minor fix
• 2022-02-03 BeePrint 1.5 MKS WiFi 1.2 Better RU translation, fix preload and check the file length
• 2022-01-08 BeePrint 1.4 MKS WiFi 1.2 Static IP configuration, mDNS, polish translation and minor fix
• 2022-01-02 BeePrint 1.3 Polish language
• 2021-12-30 1.2 Add GCODE sender widget
• 2021-12-14 1.1 Add Camera rotation features

Thanks Renzo

[Christ]

Bonjour, Commen mettre à jour l’interface Web pour la mise à jour 1.6 , je vais sur l’adresse IP

http://192.16*;**;*/update
je ne poeux que mettre à jours le Wifi
Merci d’avance

Attachments:

You must be logged in to view attached files.

[Renzo Mischianti]

Hi Christ,
you can find the information you need here.
Bye Renzo

[playzino]

Great jog. Is there a chance to receive feedback from the printer. E.g. the results of the G29 or G30 do not reach either in the GUI or the wifi connected Repeatierhost. When I connect it via USB I have the measurement results.

[Renzo Mischianti]

Hi playzino,
I publish the available commands, and I think they are not present.
Bye Renzo

[Sergio Lorenzi]

Hi, sorry for the silly question.
In order to install the new version, I read that the original MksWifi firmware should be reinstalled.
Where can I find the original version end how to install it?
Thanks
Sergio

• This reply was modified 2 months, 3 weeks ago by Sergio Lorenzi.

[Renzo Mischianti]

Hi Sergio,
the process is explained here:

MKS WIFI for Makerbase Robin: firmware upgrade and new Web Socket features – 4

Bye Renzo

[jon811]

Hi, Renzo, Thanks for firmware.
I installed it on my FBG5 and last Marlin version, it shows temperatures, SDCard and can start print. But while printing it does not show any progress. How can i find reason and fix it?

• This reply was modified 2 months, 1 week ago by jon811.

[Renzo Mischianti]

Hi jon,
you can check on your browser developer tools and go to WS –> Messages and check if the information arrives from the device.
Bye Renzo

[jon811]

Hi Renzo!
When i look in browser console i see error:
warning: logic (L(CRON_START)-2) is still running after 60s, forget to call done()? For non-ending logic, set warnTimeout: 0
May be that’s reason?

[Renzo Mischianti]

Hi Jon,
I think that there is no response from the firmware, probably the management is different and It can’t work.
Bye Renzo

[Author]

Posts