<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-WMJSQ8K" height="0" width="0" style="display:none;visibility:hidden"></iframe>

[BeePrint enhancement] Gcode shell for stepper calibrating

Tagged: BeePrint, Calibration, Enhancement

This topic has 1 reply, 1 voice, and was last updated 2 years, 9 months ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 23 January 2022 at 20:37 #18007
  Alberto
  There’s a chanche of getting a gcode shell (or something for step calibratiion of axis and extruder) on Beeprint?
  Using an external program like Repetier Host o similiar only for 10 minutes of work is odd..
  Thanks again for the great work you are doing!
- 23 January 2022 at 21:57 #18008
  Renzo Mischianti
  Keymaster
  Hi Alberto,
  In the latest version, you can find a GCode sender, but if you add the procedure to do calibration, we can think about a specified widget to automate that process.
  Bye Renzo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!