BeePrint partially works with Ghost 5 and Marlin

[Nunu00]

Hi everyone, I have a Flyingbear ghost 5 with Sergey’s marlin firmware. I tried to install BeePrint and everything went smoothly but the interface works partially.
I receive all the data regarding the various temperatures correctly, I can set the temperatures, I can home the x/y and z axes, I see the files correctly inside the sd but for example I can’t move any of the axes, I can’t delete the files from the sd and above all I can’t load new files into the sd. If I try, the loading stops around 3%, the BeePrint interface crashes and the printer screen displays the message “Error Sd Mount”, reloading the page the interface becomes visible again but it no longer communicates with the printer.
In some other topic I had read that with this firmware some people had found it good so I don’t know what the problem could be

[Renzo Mischianti]

Hi Nunu,
first of all, try to format the SD card and use only the web interface to manage It as a test.
Bye Renzo

[Nunu00]

What file system should I format it with? And what do you mean by only using the web interface to manage it?

[Renzo Mischianti]

Hi,
use fat32, use the beeprint to upload, no other system.
Bye Renzo

[Nunu00]

I just tried it and it doesn’t work, it happens exactly the same thing I wrote in the first post

Edit:
I compiled the firmware from scratch with the latest version of Marlin and now it works almost fine, the file is loaded correctly but the printing doesn’t start, I have to manually act on the screen to start printing. However, it’s still good, certainly better than before

• This reply was modified 5 months, 3 weeks ago by Nunu00.

[Renzo Mischianti]

Mmmm… It’s strange that it doesn’t start, but with the last Marlin version, can you confirm that it works correctly?
Thanks Renzo

[Author]

Posts