BeePrint work with FLSun QQs-Pro stock firmware but not with marilin

This topic has 1 reply, 1 voice, and was last updated 1 year, 6 months ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 15 April 2024 at 18:01 #30320
  luxed
  Participant
  Hi, first of all, thank you for your wonderful work. I followed the entire preparation procedure on my FLSun QQs-Pro with the stock firmware. after doing the first tests, everything works great. I tried to redo the same procedure with the marlin 2.1.2 firmware. The web interface works normally, but the printer appears disconnected. I made several attempts but couldn’t solve it. Can you give me some suggestions to solve it?
- 16 April 2024 at 08:17 #30322
  Renzo Mischianti
  Keymaster
  Hi Luxed,
  Other people tell me that they have problems with Marlin firmware. I think it manages communication in a different way, and I think it can’t work with this implementation.
  Bye Renzo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!