E30 Lora problem

[pashazaur]

Hello, i’m using lora E30 and trying to send message with wemos d1 mini and recieve it also with wemos d1 mini.
My problem is i can’t get any configuration using exact example.
I get next message:

No response from device! (Check wiring)
12

So, i checked the wiring, i put independent voltage source for E30.
I’m using LoraE220 library, is this an issue? Do i need to change it to LoraE22 series or LoraE32 series?
Thank you.

[Renzo Mischianti]

Hi Pashazaur,
The libraries support only the specified devices that are built for.
E32, E220 and E22.
Bye Renzo

[Author]

Posts