Error while compiling Wio_terminal_SdFat code in Arduino IDE

This topic has 1 reply, 2 voices, and was last updated 1 year, 6 months ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 16 October 2023 at 13:35 #27845
  DR-DNK
  Participant
  Hey Renzo!!!,
  I am using SEEED SAMD Board v1.8.5 (Seeeduino wio terminal ) and I want to run SimpleFTPServer on it . I am running the given example code (Wio_terminal_SdFat) in Arduino IDE .
  
  My library version for SimpleFTPServer is v2.1.6.
  
  These are the libraries I have installed .
  Adafruit_ZeroDMA
  SdFat
  Seeed_Arduino_FreeRTOS
  Seeed_Arduino_FS
  Seeed_Arduino_mbedtls
  Seeed_Arduino_rpcUnified
  Seeed_Arduino_rpcWiFi
  Seeed_Arduino_SFUD
  SimpleFTPServer
  SPI
  
  Also these are the configuration of my FTPServerKey.h file
  // Wio Terminal
  #define DEFAULT_FTP_SERVER_NETWORK_TYPE_SAMD NETWORK_SEEED_RTL8720DN
  #define DEFAULT_STORAGE_TYPE_SAMD STORAGE_SEEED_SD
  
  Below are the logs which consits of errors that I am encountering while compiling the code .
  
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:344:0,
  from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:62:7: error: ‘Sd2Card’ does not name a type; did you mean ‘SdCard’?
  Sd2Card card;
  ^~~~~~~
  SdCard
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:63:7: error: ‘SdVolume’ does not name a type; did you mean ‘FsVolume’?
  SdVolume volume;
  ^~~~~~~~
  FsVolume
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:71:37: error: ‘SD_CHIP_SELECT_PIN’ was not declared in this scope
  boolean begin(uint8_t csPin = SD_CHIP_SELECT_PIN);
  ^~~~~~~~~~~~~~~~~~
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:71:37: note: suggested alternative: ‘SD_CHIP_SELECT_MODE’
  boolean begin(uint8_t csPin = SD_CHIP_SELECT_PIN);
  ^~~~~~~~~~~~~~~~~~
  SD_CHIP_SELECT_MODE
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:0:
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:348:20: error: reference to ‘File’ is ambiguous
  #define FTP_DIR File
  ^
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:584:20: note: in expansion of macro ‘FTP_DIR’
  bool openDir( FTP_DIR * pdir );
  ^~~~~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:11:0:
  /home/dnk126/Arduino/libraries/SdFat/src/SdFat.h:458:16: note: candidates are: typedef class FsFile File
  typedef FsFile File;
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:344:0,
  from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:28:9: note: class SDLib::File
  class File : public Stream {
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:0:
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:348:20: error: ‘File’ has not been declared
  #define FTP_DIR File
  ^
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:584:20: note: in expansion of macro ‘FTP_DIR’
  bool openDir( FTP_DIR * pdir );
  ^~~~~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:0:
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:597:15: error: expected ‘;’ at end of member declaration
  const char* getFileName(FTP_FILE *file){
  ^~~~~~~~~~~
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:597:36: error: expected ‘)’ before ‘*’ token
  const char* getFileName(FTP_FILE *file){
  ^
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:0:
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:347:21: error: reference to ‘File’ is ambiguous
  #define FTP_FILE File
  ^
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:651:22: note: in expansion of macro ‘FTP_FILE’
  uint32_t fileSize( FTP_FILE file );
  ^~~~~~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:11:0:
  /home/dnk126/Arduino/libraries/SdFat/src/SdFat.h:458:16: note: candidates are: typedef class FsFile File
  typedef FsFile File;
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:344:0,
  from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:28:9: note: class SDLib::File
  class File : public Stream {
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:0:
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:347:21: error: ‘File’ has not been declared
  #define FTP_FILE File
  ^
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:651:22: note: in expansion of macro ‘FTP_FILE’
  uint32_t fileSize( FTP_FILE file );
  ^~~~~~~~
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:347:21: error: reference to ‘File’ is ambiguous
  #define FTP_FILE File
  ^
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:726:3: note: in expansion of macro ‘FTP_FILE’
  FTP_FILE file;
  ^~~~~~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:11:0:
  /home/dnk126/Arduino/libraries/SdFat/src/SdFat.h:458:16: note: candidates are: typedef class FsFile File
  typedef FsFile File;
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:344:0,
  from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:28:9: note: class SDLib::File
  class File : public Stream {
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:0:
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:348:20: error: reference to ‘File’ is ambiguous
  #define FTP_DIR File
  ^
  /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:727:3: note: in expansion of macro ‘FTP_DIR’
  FTP_DIR dir;
  ^~~~~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:11:0:
  /home/dnk126/Arduino/libraries/SdFat/src/SdFat.h:458:16: note: candidates are: typedef class FsFile File
  typedef FsFile File;
  ^~~~
  In file included from /home/dnk126/Arduino/libraries/SimpleFTPServer/FtpServer.h:344:0,
  from /home/dnk126/Arduino/libraries/SimpleFTPServer/examples/Wio_terminal_SdFat/Wio_terminal_SdFat.ino:15:
  /home/dnk126/Downloads/arduino-1.8.19-linux64/arduino-1.8.19/libraries/SD/src/SD.h:28:9: note: class SDLib::File
  class File : public Stream {
  ^~~~
  Multiple libraries were found for “FreeRTOS.h”
  Used: /home/dnk126/.arduino15/packages/Seeeduino/hardware/samd/1.8.5/libraries/Seeed_Arduino_FreeRTOS
  Not used: /home/dnk126/Arduino/libraries/Seeed_Arduino_FreeRTOS-master
  Multiple libraries were found for “Adafruit_ZeroDMA.h”
  Used: /home/dnk126/.arduino15/packages/Seeeduino/hardware/samd/1.8.5/libraries/Adafruit_ZeroDMA
  Not used: /home/dnk126/Arduino/libraries/Adafruit_Zero_DMA_Library
  exit status 1
  Error compiling for board Seeeduino Wio Terminal.
  - This topic was modified 1 year, 7 months ago by DR-DNK.
  Attachments:
  You must be logged in to view attached files.
- 27 October 2023 at 10:25 #27922
  Renzo Mischianti
  Keymaster
  Hi DR-DNK,
  I check the library and it works for me. Try to check your environment.
  Bye Renzo
Author

Posts