<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-WMJSQ8K" height="0" width="0" style="display:none;visibility:hidden"></iframe>

File list widdget not working

This topic has 3 replies, 2 voices, and was last updated 2 years, 5 months ago by Renzo Mischianti.

Viewing 3 reply threads

Author

Posts
- 30 August 2022 at 10:17 #22502
  Rainer
  Participant
  Hi Renzo,
  
  I managed to install your firmware on a “Wemos D1 mini” and almost everything works as it should 🙂
  There seems to be a problem with the File list widget, it shows a spinner and no files are listed. As soon as I access the Storage from the menu there is a “3D Printer disconnected” error.
  It shows a “3D Printer connected” message after that but there are no files in the list 😐
  Any idea what is causing this problem ??
  
  Thanks,
  Rainer
- 30 August 2022 at 14:05 #22504
  Renzo Mischianti
  Keymaster
  Hi Rainer,
  try to format the SD of the printer.
  Bye Renzo
- 30 August 2022 at 14:41 #22506
  Rainer
  Participant
  I formatted the SD card (16Gb card, FAT32) but the error persists.
  However the 4Gb SD card that came with the 3d printer started to work after the format.
  It’s all good now 🙂
  
  Thanks for the info!
  
  Regards,
  Rainer
- 30 August 2022 at 15:37 #22507
  Renzo Mischianti
  Keymaster
  Hehehe.. good!
  If you want, send us some photos of your work.
  Bye Renzo
Author

Posts

Viewing 3 reply threads

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!