- This topic has 4 replies, 1 voice, and was last updated 4 years, 6 months ago by .
- You must be logged in to reply to this topic.
Tagged: Question
Hello, sorry but any idea why wemos does not respond to the GPIO, goes to sleep but does not wake up due to the interruption, wakes up because the time is up (I decreased it), I already checked the page and I have the connections D0 -reset, pin 14 (D5) button
Hi Rossic, It’s strange, do you have set the pull-up resistor?
hi ! Actually now It works! (The delay 1000 its pretty important Jéjé) But only wakes one time, I’ve tried to “reset” all again in the callback but its not working… Heyy ps: why D0 -reset? I thought thats only for deep sleep
News, its works finally!, it was the PULL UP
-> this is necessary to keep light sleep, but the D0-Reset I think its just for DeepSleep to wake up, thanks for share !! good video
Hi Rossic, yes D0 Reset is for wake up for deep sleep, thanks to share your experience. Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Tutorial Web Server Wemos D1 mini WiFi