- This topic has 2 replies, 2 voices, and was last updated 2 years, 8 months ago by
.
-
Posts
-
-
Hi,
First of all, thanks for all of your work, this is great !
I am using an esp12e board, and i use it as a WiFi access point, and i implmented you simpleFTPserver in my code. As i read it, it is pretty simple to do it, i only had to update local IP address, because in AP mode, the lib does not do it. The FTP server couldn’t work correctly because of 0.0.0.0 local IP address.IPAddress myIP = WiFi.softAPIP(); IPAddress gateway(0, 0, 0, 0); // set gateway to match your network -> but i do not use :) IPAddress subnet(255, 255, 255, 0); // set subnet mask to match your network WiFi.config(myIP, gateway, subnet);I am using serial interface to grab some datas and write it on SD card. But for some reason, FTP server seems to stop working correctly when working with serial.
So i am mannaged to stop sending serial datas when client connected to ftpServer, it seems better but i still have some issues.
So my question (at least ! 😉 ) is : is it possible to stop the FTP server for a while (i would like to stop it when no client is connected on WiFi AP) and start it when a WiFi client gets connected ?
Have a nice day,
Dominique -
-
-
- You must be logged in to reply to this topic.
