- This topic has 3 replies, 1 voice, and was last updated 2 years, 9 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The projects hosted on the site › MKS WiFi firmware and BeePrint web interface › static address assignment?
MKS TFT24 V1.1 & SKR V1.3 I am using the win8 scheme if it makes a difference.
another issue… attempting to set IP address manually I have –
#Dynamic access IP
>cfg_ip_dhcp_flag:0
#IP/mask/gateway
>cfg_ip_address:192.168.1.16
>cfg_ip_mask:255.255.255.0
>cfg_ip_gate:192.168.1.1
……..it doesn’t work, the tft still registers with my router with dhcp. I was wondering if this IP setting was just for the cloud service perhaps? (which I have disabled)
Anybody got manual addressing to work?
Hi Mike,
In the Italian forum, people write about and use static ip without problems
Bye Renzo
OK… thanks for that Renzo. Anybody got a suggestion on the syntax in the config file?
Hi Mike,
Use the dynamic ip than use the my wifi firmware to set the static ip.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte EMail esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Temperature Tutorial Web Server Wemos D1 mini WiFi