<iframe src="https://www.googletagmanager.com/ns.html?id=GTM-WMJSQ8K" height="0" width="0" style="display:none;visibility:hidden"></iframe>

LoRa E32 HEAD code not corresponding

This topic has 1 reply, 2 voices, and was last updated 1 year, 4 months ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 18 July 2023 at 22:46 #26787
  ilgiovaa
  Participant
  Hi everyone, my project suddenly broke apart.
  I’ve been trying to connect via LoRa E32 (433T30D modules) two arduinos and I had managed to do so; but yesterday, without changing anything in my sketches it stopped working. I immediately tried to reset the modules with the example code but nothing has changed by then. Both channel, ADDH and ADDL are the same (I’ve left the configuration code unchanged): the only difference between the two printed configuration is the HEAD number. Does this difference matters to the communication between the two? if yes, how can I fix this? Thanks a lot for your help.
- 24 July 2023 at 08:05 #26848
  Renzo Mischianti
  Keymaster
  Hi ilgiovaa,
  It’s possible that there is some problem with the power supply during operation, and It generates a wrong status on the device.
  Try to put a better power supply and retry.
  Bye Renzo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!