- This topic has 1 reply, 2 voices, and was last updated 1 year, 4 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › LoRa E32 HEAD code not corresponding
Hi everyone, my project suddenly broke apart.
I’ve been trying to connect via LoRa E32 (433T30D modules) two arduinos and I had managed to do so; but yesterday, without changing anything in my sketches it stopped working. I immediately tried to reset the modules with the example code but nothing has changed by then. Both channel, ADDH and ADDL are the same (I’ve left the configuration code unchanged): the only difference between the two printed configuration is the HEAD number. Does this difference matters to the communication between the two? if yes, how can I fix this? Thanks a lot for your help.
Hi ilgiovaa,
It’s possible that there is some problem with the power supply during operation, and It generates a wrong status on the device.
Try to put a better power supply and retry.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Tutorial Web Server Wemos D1 mini WiFi