Electronic, 3D printing and embedded programming
I use this esp32-cam for all my monitoring systems and also for do some video with multiple windows, I think that the integrated led feature in the esp32-cam board can be very usefully, so I thought about adding control on the web interface.
ESP32 CAM high resolution draw of pinout and specs
ESP32, a little guide on how to use this low cost but powerful microcontroller with WIFI integrated.
Pinout, specification and IDE configuration to start use your esp32-cam.
ESP32 WeMos LOLIN32 Lite high resolution pinout and specs
EByte LoRa E32 Manager: Web solution, for esp8266 and esp32, to configure and test LoRa devices
I do many projects with EByte LoRa E32, all based on my library, and many people download it, but EByte’s tools are very poor and sometimes faulty. So I tried to create a Web manager that also works as a Gateway, here’s how to interface the Back End.
ESP32 DevKitC v4 high resolution pinout and specs
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We will now render images and create a simple animation and take a look at the byte array generator.
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We are going to use it with SPI and i2c and learn the basic function.
I’m going to use the esp32, and the first problem was how to put It on breadboard, so we are going to print an adapter, then I build a PCB to program.
