- This topic has 1 reply, 2 voices, and was last updated 3 years, 3 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The projects hosted on the site › ABB (ex Power One) Aurora Web Inverter Monitor (WIM) › ABB Aurora WIM power supply
Hello Renzo, a great project you have made.
I think it’s really great and would like to rebuild it.
What I wonder, why do you need a battery?
You wrote, if there is no sun, the ESP runs via battery.
Where does the ESP get the power from when the sun is shining?
You must have a 230V to 5V power supply somewhere. At the 230V you actually always have power, unless there would be a power failure.
Can you give me a hint or post a photo?
Thanks
Chris
Hi jetronic,
under my roof I have only the power from solar inverter, so if no sun no power, and I add an UPS to the device so the server It’s always online, and I prevent power noise.
The system work without that also, you must only remove the battery shield.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Temperature Tutorial Web Server Wemos D1 mini WiFi