- This topic has 1 reply, 2 voices, and was last updated 4 years, 1 month ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › Can’t use the NeoSWSerial library
Tagged: NeoSWSerial, SoftwareSerial
Hi I’m a newbie and I need help.
I cannot use the library https://github.com/SlashDevin/NeoSWSerial instead of SoftwareSerial and am getting the error.
warning: invalid conversion from 'NeoSWSerial*' to 'byte {aka unsigned char}' [-fpermissive]
Can you help me a little?
My code:
#include <NeoSWSerial.h>
// Arduino pins used for the LoRa RF-module E32-433T20DT
#define PIN_RX 10
#define PIN_TX 11
#define PIN_M0 A1
#define PIN_M1 A2
#define PIN_AUX 12
NeoSWSerial loraSerial(PIN_RX, PIN_TX); // RX, TX
LoRa_E32 e32ttl(&loraSerial, PIN_AUX, PIN_M0, PIN_M1);
Hi ddv_adm,
no sorry, the support for that library is not implemented, I don’t use original Stream because I need more method to put on work the device.
When I’m more free I take a look to the integration.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Temperature Tutorial Web Server Wemos D1 mini WiFi