- This topic has 1 reply, 2 voices, and was last updated 1 year, 6 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › Config EByte E32
Tagged: E Byte E32 Config
Hi Renzo,
I’ve tried to configure an EByte E32 with défaults settings and it doesn’t work.
I used your SetConfuguration program with this config.
The wiring is OK.
It seems working but each time i turn power on, the olds parameters came up.
Could you help me ?
Thanks a lot,
J-F
Hi Jeff,
if the wiring It’s ok, the only known problem can be the power supply insufficient, or the device broken.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Tutorial Web Server Wemos D1 mini WiFi