Config EByte E32

Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › Config EByte E32

Tagged: 

Viewing 1 reply thread
  • Author
    Posts
    • 4 May 2023 at 21:47 #25585
      Jeff
      Participant

        Hi Renzo,
        I’ve tried to configure an EByte E32 with défaults settings and it doesn’t work.
        I used your SetConfuguration program with this config.
        The wiring is OK.

        It seems working but each time i turn power on, the olds parameters came up.
        Could you help me ?

        Thanks a lot,

        J-F

      • 16 May 2023 at 09:06 #25740
        Renzo Mischianti
        Keymaster

          Hi Jeff,
          if the wiring It’s ok, the only known problem can be the power supply insufficient, or the device broken.
          Bye Renzo

      • Author
        Posts
      Viewing 1 reply thread
      • You must be logged in to reply to this topic.
      Exit mobile version