- This topic has 1 reply, 1 voice, and was last updated 2 years, 7 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › E32 915T20D
When i use your sketch and example library to change the frequency on my module (#define FREQUENCY_915) it changes my frequency to 920. how do i get it to 915. trying to send it to a different brand lora module. thanks…
Hi Travis,
you must set the correct channel configuration, I think It’s channel 15.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display DynamoDB E32 EMail esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Temperature Tutorial Web Server Wemos D1 mini WiFi