- This topic has 2 replies, 2 voices, and was last updated 2 years, 5 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e22 UART devices sx1262/sx1268 › How can we calculate the signal quality?
I am using the RSSI feature of the E22, but is it possible to calculate it in dBm as in wifi? Or how can RSSI be categorized as good medium bad signal?
For example: rssi 255 -200 like good signal
Have nice day…
Hi musti,
It’s an interesting question, but I don’t have an answer, so I am writing to Ebyte. I will alert you when receiving the response.
Bye Renzo
Hi Musti,
I receive a response from EByte
We don’t have a chart to categorize it, because it is a relative value compared with the value when the module have good signal.
I think you can use that value only for reference, because a less RSSI can be avoid with a lower air rate and so on.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Temperature Tutorial Web Server Wemos D1 mini WiFi