- This topic has 4 replies, 2 voices, and was last updated 3 years, 6 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › LoRa Arduino Freezing with one receiver and multiple senders
I am trying to set up a stable transmission system so that multiple transmitters can target one receiver. I get data about 5 times but then it freezes. I set up the circuit as you describe it.
I share the receiver and the following sender codes
Thank you in advance for your help
Hi sezgin,
I think the problem is in these lines:
//rsc.close();
free(rsc.data);
remove the line with free
command and use the close
like the examples.
You can’t free a pointer to data from free of the sctructure.
Bye Renzo
hi renzo;
i did what you said but it froze again. i found that the more I reduce the “delayy” time, the more it reads the sensor and then freezes. The more I increase the “delayy” time, the less it reads the sensor and freezes.
delayy (3500); ->Freezes after about 5 reading
delayy(1000); -> Freezes after about 15 reading
I hope this information helps you
Thank you in advance for your help
hi renzo:
did you have look at this problem.
i am waiting for your help.
Sorry sezgin,
I need more time to do this test. I’m very busy, but I try as son as possible.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Tutorial Web Server Wemos D1 mini WiFi