- This topic has 5 replies, 2 voices, and was last updated 3 years, 2 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › LoRa E32 E22 ESP32 DEV KIT V3 shield PCB
Ordered the boards from PCBWay through your link, only got 5 boards for $5, and having an issue as the ESP8266 board I have does not fit the pin spacing, the spacing on the boards I received is too wide.
Hi Andrew,
I can’t see your photo, read the note to the left to insert external image or upload a 512Kb image.
It’s strange It’s fit perfectly like you can see in the photo
Bye Renzo
Hi Andrew,
I think you are wrong, I have some versions of NodeMCU (esp8266) and the form factor isn’t the same of esp32 DOIT DEVKIT v1 as you can see in the photo.
Bye Renzo
Hi Renzo,
OK, I’ll order a couple of the ESP32 Dev Kit boards and give them a try. Waiting for female headers anyway.
Thanks,
Andrew
Hi Andrew,
if you want exist the versione for WeMos D1 mini an esp8266.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Tutorial Web Server Wemos D1 mini WiFi