MKS TFT35 Laser MksWifi

Tagged: Enhancement

This topic has 11 replies, 2 voices, and was last updated 1 year, 2 months ago by Renzo Mischianti.

Viewing 11 reply threads

Author

Posts
- 21 June 2022 at 21:40 #21460
  
  Anton7558
  Participant
  
  Thanks for your work . I liked everything, but there is a problem with the laser, two axes x and y, and therefore the machine control does not work. Can you fix the web interface for the 2 axis laser engraving machine?
- 22 June 2022 at 08:13 #21461
  
  Renzo Mischianti
  Keymaster
  
  Hi Anton,
  I don’t have a machine to test, and now I’m out for all the week.
  When I return to home I try to check something.
  Bye Renzo
- 26 June 2022 at 18:15 #21494
  
  Renzo Mischianti
  Keymaster
  
  Hi Anton,
  It seems fully compatible with MKS WiFi standards.
  Witch kind of firmware do you have?
  Bye Renzo
- 27 June 2022 at 14:33 #21513
  
  Anton7558
  Participant
  
  Hi Renzo! MKS TFT35 v1.0 firmware MKS_TFT35_CNC_V1.0.3
  Mks WiFi firmware is yours. I would like the print widget to have the ability to select the number of passes and select the speed of the print pass. It does not delete files from the SD card, probably there is no such function in the original TFT firmware. So in general it is well suited for a two-axis machine, no temperature is needed and there is no hair dryer.
- 28 June 2022 at 10:05 #21519
  
  Renzo Mischianti
  Keymaster
  
  Hi Anton,
  to do that I need some hardware, I write to Makerbase if they support the project with some sample hardware to help me.
  Bye Renzo
- 2 July 2022 at 09:09 #21547
  
  Anton7558
  Participant
  
  Hi Renzo! I can test your result on my equipment. While I broke the tft display with permanent firmware, I’m looking for a way to restore it 🙂
- 4 July 2022 at 08:32 #21563
  
  Renzo Mischianti
  Keymaster
  
  Hi Anton,
  to develop a web solution for that machine I need the hardware.
  No response from Makerbase, you can try to write to him for that support (蔡钦栋 ).
  Bye Renzo
- 4 July 2022 at 10:57 #21567
  
  Anton7558
  Participant
  
  Hi Renzo! I restored my display via UART, flashed the bootloader, everything works. It is useless to write to MKS support, they abandoned this project a long time ago, there are a lot of errors and complaints from the consumer, they do not solve these problems. If it is not possible, then leave this project, I will look for another solution. WIFI MKS in this case is useless for the laser!
- 8 July 2022 at 20:43 #21816
  
  Anton7558
  Participant
  
  Hi Renzo! Tell me what program can I use to connect the virtual COM port? And how to set up the connection of the LaserGrbl program with esp8266?
- 10 July 2022 at 22:03 #21824
  
  Renzo Mischianti
  Keymaster
  
  Hi Anton,
  you can read all that information in the relative articles.
  MKS WIFI for Makerbase Robin: boards and how to wiring esp12 & NodeMCU – 1
  MKS WIFI for Makerbase Robin: PCB and how to compile & upload firmware – 2
  MKS WIFI for Makerbase Robin: communication protocol and Cura plugin – 3
  MKS WIFI for Makerbase Robin: firmware upgrade and new Web Socket features – 4
  MKS WIFI for Makerbase Robin: BeePrint web interface with Camera on Flying Bear Ghost – 5
  
  Bye Renzo
- 11 July 2022 at 11:32 #21826
  
  Anton7558
  Participant
  
  Thanks Renzo! There is nothing new for me here, sorry useless site! I just need to control the laser machine a little, but they don’t hear me here! All sources that you posted are empty. I compile them and get a stock version, it’s a shame!
- 12 July 2022 at 09:41 #21827
  
  Renzo Mischianti
  Keymaster
  
  Hi Anton,
  I check the link and the source, and all are correct.
  Explain which step you make to do the build.
  Bye Renzo
Author

Posts