read state of pcf after a reboot

This topic has 1 reply, 2 voices, and was last updated 2 years, 3 months ago by Renzo Mischianti.

Viewing 1 reply thread

Author

Posts
- 13 April 2023 at 20:45 #25312
  michael
  Participant
  hi renzo,
  
  i am going to use the pcf as a replacement for mcp23017. all ports are outputs (16). when using the mcp, pinmode putput, i can still read the registers state with readgpioab. this is very useful after a reboot to know in which state the mcp pins are (high or low). is it also possible to do the same with pcf? get the state of all outputs after a reboot? tnx for your help. mike
- 14 April 2023 at 17:04 #25335
  Renzo Mischianti
  Keymaster
  Hi Mike,
  Probably pcf8474 maintains the state with the continuous current.
  But my library restarted the pcf in Setup and I think you lost all.
  Bye Renzo
Author

Posts

Viewing 1 reply thread

You must be logged in to reply to this topic.

Maintaining a repository (or site or forum) is a lot like tending to a garden - it requires constant care and attention to keep it thriving. If you're a skilled gardener (or coder!) and want to help keep our repository blooming, we'd love to have you on board! We're also looking for talented writers and forum moderators to help us grow our community. Interested in joining our team? Don't hesitate to reach out and let us know how you can contribute!