- This topic has 5 replies, 2 voices, and was last updated 1 year, 1 month ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e220 UART devices LLCC68 › Sending data via LORA to the IOT gateway
Hi,
I have an IOT gateway and an arduino board with an E220 module. How can I send data from arduino to my gateway? Currently, I have an air condition sensor dedicated to the gateway and the gateway receives packets such as on the screen below:
For Example:
A payload with the device address and devEUI is sent in a JnReq packet, and the values from the sensors are sent in the UpUnc packet
Is it possible to make an ABP join with the E220 module?
Hi,
Witch kind of Gateway do you have?
Bye Renzo
Milesight UG56
Hi,
the compatible Gatewais are distributed by EByte, your gateway can’t work with E220.
Bye Renzo
Thanks for the answer. Can you suggest which module will handle OTAA or ABP?
Hi,
I think only e78 support that, for the e220 i think there are any normal lora gateway.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Temperature Tutorial Web Server Wemos D1 mini WiFi