Electronic, 3D printing and embedded programming
Learn how to harness GPS with Arduino and the GY-NEO-6M module. This article explains wiring, reading raw NMEA data, and using the TinyGPSPlus library for effective positioning and tracking. Whether for a tracking system or finding lost items, you’ll get practical examples and clear guidance.
We have already addressed the topic of remote wireless programming via Bluetooth of an Arduino UNO in our previous article titled “Arduino Remote/wireless Programming” however, thanks to the feedback and questions from our readers, we have decided to delve even deeper into this subject, exploring the possibilities that WiFi connectivity offers.
As usual our microcontrollers give a wide range of wake up sources, we already see a timed wake-up, and now we introduce the wake-up via RTC alarm and Serial of our STM32.
ESP32 have 2 multiple UART, they are very usefully for debug, and this device have also a core logging system that you can use to debug and control your code.
WeMos D1 mini have 2 UART, one on dedicated pins and a transmit-only UART that can be enabled on GPIO2 (D4), It’s very usefully for debug.
Support free knowledge!To keep this site free, I use affiliate links. If you buy through these links, I receive a small commission at no extra cost to you. It’s a simple way to support my work. Thank you!
