Electronic, 3D printing and embedded programming
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Now we are going to analyze the changes I made to the original MKS WiFi module, with the introduction of Web Socket and some little features to develop Web interface and debug.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I explain how the Makerbase develop the communication protocol via TCP messages and a little introduction to MKS WiFi plugin for Cura.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Here I’d like to explain what is the MKS WiFi module how to program and how to connect a device that can be used like WiFi module alternative.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I would like to say a few things about the Makerbase Robin Nano board hardware and interfacing with the WiFi module.
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi.
In this article we are going to explain OTA updates via Web Borwser with a custom web page.
I bought an Alexa device and since then I don’t want to press a button anymore and I want to turn all my devices into voice control.
We have reached the last phase, now we have to go and test our smart home skill on a device, this must first be enabled and linked to your Amazon developer account.
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi.
In this article we are going to explain OTA via Web Borwser of signed firmware and HTTPS with self signed certificate.
