Category: Ghost 5

Makerbase MKS wifi firmware upgrade mischianti 28

MKS WIFI for Makerbase Robin: firmware upgrade and new Web Socket features – 4

I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Now we are going to analyze the changes I made to the original MKS WiFi module, with the introduction of Web Socket and some little features to develop Web interface and debug.

Makerbase MKS wifi protocol communication and cura plugin 0

MKS WIFI for Makerbase Robin: communication protocol and Cura plugin – 3

I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I explain how the Makerbase develop the communication protocol via TCP messages and a little introduction to MKS WiFi plugin for Cura.

Makerbase MKS wifi module upload flash compile pcb 13

MKS WIFI for Makerbase Robin: PCB and how to compile & upload firmware – 2

I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Here I’d like to explain what is the MKS WiFi module how to program and how to connect a device that can be used like WiFi module alternative.

Makerbase MKS Robin Nano wifi module wiring 10

MKS WIFI for Makerbase Robin: boards and how to wiring esp12 & NodeMCU – 1

I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I would like to say a few things about the Makerbase Robin Nano board hardware and interfacing with the WiFi module.

FlyngBear Ghost 5 front cover door 0

FlyingBear Ghost 5 enclosure: front cover/door

I finally buy another 3D printer, this time I choiche the FlyingBear Gost 5, and I made a case because I would like to print a more dangerous material like ABS, and to do that I create two different backs of the top cover, one standard and one with a fan for extracting harmful fumes. Fron cover/panel.

FlyngBear Ghost 5 Top cover 15

FlyingBear Ghost 5 enclosure: top cover

I finally buy another 3D printer, this time I choiche the FlyingBear Gost 5, and I made a case because I would like to print a more dangerous material like ABS, and to do that I create two different backs of the top cover, one standard and one with a fan for extracting harmful fumes. Top cover.