Electronic, 3D printing and embedded programming
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
It’s time to upload the program and front end to test your device.
I would like to introduce version 2 of the EMailSender library, a great evolution compared to version 1, with support for Arduino with w5100, w5200 and w5500 ethernet devices and enc28J60 clone devices, support for esp32 and esp8266 and finally (from version 2.2.0) support for all Arduino (SAMD) devices using the WiFiNINA library (Arduino UNO WiFi Rev.2, Arduino NANO 33 IoT, Arduino MKR 1010 and Arduino MKR VIDOR 4000 WiFi etc.). Now you can add attachments also, loaded from storage device like SD or SPIFFS.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Now we must solder and assembly the free PCB that I create for this centraline.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
It is time to understand how the data we have recovered will be shown, both historical and in real time.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Here I’d like to explain how to configure WiFi first time and I show REST API of the device.
