- This topic has 6 replies, 3 voices, and was last updated 2 years, 7 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › Arduino to esp32 lora e32
Working on my final project and I need help with sending data from an Arduino UNO to an esp32 using Lora e32 I read on your library and I am reaching out if you could help me
Hi George,
I think you can follow these steps.
First, check the complete wiring (all pins, not M0 and M1 to GND and 3.3v). You can find the connection schema in this article.
Ebyte LoRa E32 device for Arduino, esp32 or esp8266: library – 2
Then understand the communication type you need
Ebyte LoRa E32 device for Arduino, esp32 or esp8266: fixed transmission – 4
And finally, configure the device.
EByte LoRa E32 Web Manager: description, configure and demo (esp8266, esp32) – 2
Change only the wiring from one device and another.
Bye Renzo
I get an error when I try to compile the code for fixed transmission point. Find the screenshot attached indicating the error
Hi George,
read the comments on sketch, that a configuration for esp8266, and you have arduino and esp32.
Bye Renzo
Oh okay , so how do i get the configuration for the esp32
Hi George,
you can find the explanation of the configuration here.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Temperature Tutorial Web Server Wemos D1 mini WiFi