- This topic has 5 replies, 2 voices, and was last updated 1 year, 11 months ago by .
- You must be logged in to reply to this topic.
Home › Forums › The libraries hosted on the site › EByte LoRa e32 UART devices sx1262/sx1268 › lora E32-900t20d + TTN gateway
Hello I have an arduino mini 168 5.5v, a lora E32900TD module and an indoor gateway from the things network TBMH-100 model, i managed to configure the arduino with my module and added the gateway to the TTN. However, I tried to used the ABP method key that I found online for an sx1276 module, it turned out it was not the same for UART interface. I cannot find any useful guidance.
How to make them communicate please this is a student project. appreciate your kind support.
Hi lifeislife,
I think the gateway isn’t compatible with the module, EByte has his gateway, or you can build one like in these articles.
EByte LoRa E32 gateway: manage via REST and WebSocket (esp8266, esp32) – 1
Bye Renzo
Thank you for your reply. kindly, can I add 2xESP32 on each end node device that has 1 lora module and 1x Arduino min pro 168 then channel their data to the things network server application so I can see on the console the end device activity?
If you want send data to thing network you must implement the specified protocol.
I think a better solution is to use a simple MQTT server like other IoT device.
Bye Renzo
Thank you for your support. How can we change the baud band of the esp8266 from 115200 to 9600?
Hi,
you can pass the baud rate via Constructor, but by default It use 9600.
Bye Renzo
More
3D Printer 3D printer upgrade ABB Arduino Arduino IDE Arduino SAMD boards Aurora AWS CNC Cyclone PCB Factory Cyclone PCB Factory how to build It Display E32 E70 EByte esp01 esp32 esp8266 File System Firmware i2c Library LoRa MicroPython Milling PCB My PCB Networking PCB pinout Power saving Programming board Raspberry Pi REST API RF rp2040 SD Card Sensors Sleep and Wake UP SPI STM32 Storage devices Tutorial Web Server Wemos D1 mini WiFi