Electronic, 3D printing and embedded programming
ABB is a global technology company that specializes in robotics, power, electrical equipment, and automation technology. It is known for pioneering advanced technologies in various industries, including utilities, industry, transport, and infrastructure. Headquartered in Zurich, Switzerland, ABB operates in more than 100 countries and is one of the largest engineering companies worldwide.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Now a case where you can insert all the component to complete the work.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
It’s time to upload the program and front end to test your device.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Now we must solder and assembly the free PCB that I create for this centraline.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
It is time to understand how the data we have recovered will be shown, both historical and in real time.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Here we are going to explore how to create an UPS and how correctly set date.
I would like to monitor the status of my ABB Aurora inverter (formerly Power One now Fimer). So with a WeMos D1 mini I create a monitoring station with web interface, notifications and more.
Notification is a basic feeature of every monitoring system, here we check how to configure the device to send email with errors.
I would like to monitor the status of my ABB Aurora inverter (formerly Power One now Fimer). So with a WeMos D1 mini I create a monitoring station with web interface, notifications and more.
Now we are going to wire our Arduino to the Inverter.
Here my library that implements the complete communication protocol of ABB (ex PowerOne) Aurora Inverter suitable with Arduino, esp8266 and esp32.
I would like to monitor the status of my ABB Aurora inverter (formerly Power One now Fimer). So with a WeMos D1 mini I create a monitoring station with web interface, notifications and more.
Here we will explore the infrastructure of the project.
To keep this site free, I use affiliate links. If you buy through these links, I receive a small commission at no extra cost to you. It’s a simple way to support my work. Thank you!
Waveshare ESP32-C3 Zero: high-resolution pinout, datasheet, and specs
25 September 2025
