Ciclop 3D scanner: components testing and calibration – 4
Continue the tutorial on “how to build a Ciclop 3D scanner”, in the previous articles we have build the component and assembly they, now we start calibration and testing.
Category: Ciclop 3D scanner how to build It
Ciclop 3D scanner: assembling electronic and wiring – 3
After assembling the basic mechanical components it is now time to assemble and connect all the electronic parts. The assembly documents have disappeared from the net so I’m going to add the documents to this article.
Ciclop 3D scanner: production and assembly of the control PCB – 2
In this article I would like to show my custom PCB for the Ciclop 3D scanner which is fully compatible with the original ZUM.
Ciclop 3D scanner: component printing and assembly – 1
I’d like to build the famous Ciclop 3D scanner.
In this article I enter all the steps for 3D printing and assembling the structure, I have made some corrections to simplify the process.
3D Printed base for Ciclop 3D Scanner
I’m going to create the famous Ciclop 3D Scanner, but my first problem is how to get round plexiglass base, but the costs is too expensive. So I decided to design a printable one.
