WeMos D1 mini (esp8266), debug on secondary UART – Part 3
WeMos D1 mini have 2 UART, one on dedicated pins and a transmit-only UART that can be enabled on GPIO2 (D4), It’s very usefully for debug.
Category: Tutorial
WeMos D1 mini (esp8266), integrated SPIFFS Filesystem – Part 2
Serial Peripheral Interface Flash File System, or SPIFFS for short. It’s a light-weight file system for microcontrollers with an SPI flash chip. The on-board flash chip of the ESP8266 has plenty of space for your files.
WeMos D1 mini (esp8266), pinout, specs and IDE configuration – Part 1
WeMos D1 mini, a little guide to use this low cost but powerful microcontroller with WIFI integrated.
Specification and IDE configuration to start use It.
ATtiny Programmer Board (ArduinoUNO As ISP)
I really like the ATtiny and programming it, so I built a simple board to use Arduino UNO as ISP in a faster way.
Temperature humidity sensors comparison (Data) Part 3
Wherever I go, peoples asked me why I chose DHT12, and why I spent time to write a library for this small sensor, in this articles I’ll try to give an answer (competitor bmp280, DHT11, DHT22, Dallas and thermistor).
Finally the comparison.
Temperature humidity sensors comparison (Code configuration) Part 2
Wherever I go, peoples asked me why I chose DHT12, and why I spent time to write a library for this small sensor, in this articles I’ll try to give an answer (competitor bmp280, DHT11, DHT22, Dallas and thermistor).
Today the code to get sensors fully working.
3D Printed base for Ciclop 3D Scanner
I’m going to create the famous Ciclop 3D Scanner, but my first problem is how to get round plexiglass base, but the costs is too expensive. So I decided to design a printable one.
Temperature humidity sensors comparison (Specifications) Part 1
Wherever I go, peoples asked me why I chose DHT12, and why I spent time to write a library for this small sensor, in this articles I’ll try to give an answer, and introduce the competitor bmp280, DHT11, DHT22, Dallas and thermistor.
Today the specification of the sensors I use.
CNC Cyclone PCB Factory: settings and tests – Part 7
I’d like to renew my cnc for PCB so I decide to create new one from an existing project named Cyclone PCB Factory.
Firmware configuration and milling process.
CNC Cyclone PCB Factory: boards and other – Part 6
I’d like to renew my cnc for PCB so I decide to create new one from an existing project named Cyclone PCB Factory.
Service board explained with schema and some other addictions.
