Arduino Remote/wireless Programming
You may need to program Arduino microcontroller (like) remotely to debug in the freezer.
Here is my solution to the problem.
Monthly Archive: January 2019
Emergency power bank homemade
When you need a power bank probably you have all the component at home, I had a problem and I had to make one quick.
ESP-01 modules programming board
ESP-01 is low cost esp8266 module, with built-in WIFI.
It was created as Arduino WIFI module, but It’s more powerful than an Arduino, than now if you need a little module to control a relay or some simple digital datalogger It’s the best solution.
Character LCD I2c Adapter
I’m going to explain a connection schema for a character display i2c adapter.
PCF8591 i2c Analog I/O Expander
Library to use i2c pcf8591 IC with arduino and esp8266.
This IC can control (until 4) analog input and/or 1 analog output like measure voltage, read thermistor value or fade a led.
Can read analog value and write analog value with only 2 wire (perfect for ESP-01).
I try to simplify the use of this IC, with a minimal set of operation.
PCF8574 i2c digital I/O expander: Arduino, esp8266 and esp32, basic I/O and interrupt – Part 1
Library to use i2c pcf8574 IC with arduino and esp8266.
This IC can control (until 8) digital devices like button or led with 2 only pins.
Can read and write digital value with only 2 wire (perfect for ESP-01).
I try to simplify the use of this IC, with a minimal set of operation.
DHT12 i2c Cheap Humidity and Temperature Sensor
This is an Arduino and esp8266 library for the DHT12 sensor, a very low cost temperature/humidity sensors (less than 1$) that work with i2c or one wire connection
