Electronic, 3D printing and embedded programming
This article delves into the configuration of the EByte LoRa E32, we’ll guide you through the critical steps of configuration, from setting up the hardware environment to fine-tuning the software parameters. Whether you’re a seasoned developer or a curious enthusiast.
The article provides an overview of the SunFounder RasPad 3, a device that converts a Raspberry Pi into a versatile tablet. It covers the assembly process, including integrating a Raspberry Pi 4 and an M2. SSD. The guide concludes with instructions for setting up a multi-boot system using PINN, allowing users to alternate between various operating systems for different applications.
DOIT DT-06: high-resolution pinout and specs
The Ebyte LoRa E32 library is a comprehensive tool designed to facilitate seamless communication with LoRa wireless modules. Developed for programmers and tech enthusiasts alike, the library enables a smooth interfacing with Ebyte’s LoRa E32 devices using MicroPython, a lean and efficient implementation of the Python 3 programming language.
In this article, we finally delve into the backup domain, a crucial step towards resolving the issue of state preservation across sleep modes. We initiate with a comprehensive exploration of the RTC backup registry, subsequently moving onto an analysis of the backup mechanisms for SRAM memory.
Another important element of STM32 is the backup domain. After a brief introduction to the topic, we will evaluate and test the standard solution for RESET, namely the use of variables in the “noinit” and “persistent” memory areas, a very interesting management. And we will write some simple functions to check the features of our devices.
After the timed, alarm and Serial wake-up, the most used one is the wake-up via an external source. In this case, we must pay attention to the pinout of our device to select the correct pin in the correct situation.
ESP-01S (esp8266): high-resolution pinout and specs
ESP-01 (esp8266): high-resolution pinout and specs
The SunFounder Zeus Car Smart Car Kit for Arduino UNO is an educational kit designed for beginners and children to gain hands-on experience in electronics, robotics, and programming.
It’s very fun to upgrade and programming with It.
In this article we are going to apply two upgrade: light and WiFi boost.
