Electronic, 3D printing and embedded programming
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi.
In this article we are going to explain OTA updates via Web Borwser with a custom web page.
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi.
In this article we are going to explain OTA via Web Borwser of signed firmware and HTTPS with self signed certificate.
NodeMCU v2 and v2.1 high resolution pinout and specs
OTA (Over the Air) update is the process of uploading firmware to an ESP module using a Wi-Fi. In this article we will explain how to make OTA updates via Web Browser, with and without basic authentication.
An important features that simplify the sharing of firmware (and It is used by the most productor) is to generate pre-compiled binary file with only the sketch part (or filesystem).
In this article we are going to generate filesystem binary file and we try to flash esp8266 with Espressif Download Tool.
An important features that simplify the sharing of firmware (and It is used by the most productor) is to generate pre-compiled binary file with only the sketch part (or filesystem).
In this article we will see how to generate the binary firmware and how to sign it.
EByte LoRa E32 Manager: Web solution, for esp8266 and esp32, to configure and test LoRa devices
I do many projects with EByte LoRa E32, all based on my library, and many people download it, but EByte’s tools are very poor and sometimes faulty. So I tried to create a Web manager that also works as a Gateway, here’s how to interface the Back End.
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We will now render images and create a simple animation and take a look at the byte array generator.
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We are going to use it with SPI and i2c and learn the basic function.
