E32 Shield on E220 | Help
Hello, I have bought the shield that you sell for the E32 EBYTE, but I am using it with an E220, I am modifying the basic code so that it receives and sends simple...
35 Search results
For the term "ebyte shield".
Ebyte LoRa E220 device for Arduino, esp32 or esp8266: manage Wake On Radio and sends structured data – 5
In this article, we look at the Wake On Radio (WOR), one of the essential features of our Ebyte E220 UART LoRa device based on LLCC68 Wireless Modules.
Then we understand how to manage complex structures that are better optimized than string format data.
Ebyte LoRa E22 device for Arduino, esp32 or esp8266: power-saving WOR and structured data – 5
Now we’re looking at Wake On Radio (WOR) and power-saving, one of the essential features of our E22 UART LoRa device based on popular Semtech’s SX1262, SX1268 RF chips.
Then we’ll understand how to manage complex structures that are better optimized than string format data.
Ebyte LoRa E220 LLCC68 device for Arduino, esp32 or esp8266: specs and basic use – 1
Here is a tutorial on library of new Ebyte LoRa (Long Range) devices. E220 device based on LLCC68 very cheap and long-range (from 4Km to 10Km) with less power than sx1268.
Start with specs and basic use.
RTC_DATA_ATTR Failure
Gist of E220_Ticker_Test_Receiver.ino RTC_DATA_ATTR is not saving variables when going to deep sleep. Trying to create elapsed timer using Ticker library; minuteTicker.attach keeps re-initalizing intterrupt. Another RTC variable does not work; bootcount is always ...
Reply To: ESP32-S3 deep_sleep with E220
Hi Fabiooo, the problem of deep sleep was explained here, to be sure to read the message you must use light sleep. The power-consuming difference isn’t so big, so It’s preferable. Bye Renzo
Reply To: E32 Shield on E220 | Help
Hi Giuseppe, I don’t know which shield you buy, but you can go to the article on the relative shield and get the constructor. Bye Renzo
Reply To: Board Esp-f (Based with ESP8266) WDT Reset
Ciao Alex, dando per scontato che hai l’ultima versione della libreria. Innanzitutto prova a rimuovere la riga LoraWan_Config.close(); E non usare il PWR_DWN_LOSE, a questo punto potrebbe esserci un problema li che ho fixato...
Reply To: E22 deep sleep mode
Hi Musti, I write an article on how to manage the microcontroller deep sleep with E32, and you can find It here Ebyte LoRa E32 device for Arduino, esp32 or esp8266: WOR (wake on...
Maximum current through esp32 with 30dB module
I’m looking to use a 30dBi lora module connected to an esp32 for a project. Looking at some information on this site, and the specifications I notice the modules draw up to 700mA of...
