Electronic, 3D printing and embedded programming
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I explain how the Makerbase develop the communication protocol via TCP messages and a little introduction to MKS WiFi plugin for Cura.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
Here I’d like to explain what is the MKS WiFi module how to program and how to connect a device that can be used like WiFi module alternative.
I want to modify the WiFi module firmware of my FlyingBear Ghost 5 to support the Web Socket protocol and I want to develop the web interface as well.
In this article I would like to say a few things about the Makerbase Robin Nano board hardware and interfacing with the WiFi module.
For my projects and my family I create a simple modular system for the construction of arms and supports of various kinds. Here I start to put the basic elements to create some solutions.
Here you can find the housing for esp32-cam module.
For my projects and my family I create a simple modular system for the construction of arms and supports of various kinds. Here I start to put the basic elements to create some solutions.
Continue the tutorial on “how to build a Ciclop 3D scanner”, in the previous articles we have build the component and assembly they, now we start calibration and testing.
After assembling the basic mechanical components it is now time to assemble and connect all the electronic parts. The assembly documents have disappeared from the net so I’m going to add the documents to this article.
In this article I would like to show my custom PCB for the Ciclop 3D scanner which is fully compatible with the original ZUM.
I’d like to build the famous Ciclop 3D scanner.
In this article I enter all the steps for 3D printing and assembling the structure, I have made some corrections to simplify the process.
I’d like to monitoring my ABB Aurora inverter. So with an WeMos D1 mini I create a centraline with web interface, notification and other.
Now a case where you can insert all the component to complete the work.
