Electronic, 3D printing and embedded programming
After assembling the basic mechanical components it is now time to assemble and connect all the electronic parts. The assembly documents have disappeared from the net so I’m going to add the documents to this article.
In this article I would like to show my custom PCB for the Ciclop 3D scanner which is fully compatible with the original ZUM.
I’d like to build the famous Ciclop 3D scanner.
In this article I enter all the steps for 3D printing and assembling the structure, I have made some corrections to simplify the process.
The association of social promotion “YellowBox” is about to hold its first contest, related to the project “Meglio Un Uovo Domani” (MUUD) which means “Better An Egg Tomorrow”.
MUUD is a development project for the rural populations of Burundi, extendable to other areas of Africa.
The goal is to guarantee high-tech incubators for eggs to the populations involved.
ESP32 WeMos LOLIN32 Lite high resolution pinout and specs
EByte LoRa E32 Manager: Web solution, for esp8266 and esp32, to configure and test LoRa devices
I do many projects with EByte LoRa E32, all based on my library, and many people download it, but EByte’s tools are very poor and sometimes faulty. So I tried to create a Web manager that also works as a Gateway, here’s how to interface the Back End.
ESP32 DevKitC v4 high resolution pinout and specs
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We will now render images and create a simple animation and take a look at the byte array generator.
And now a new update for my Simple FTP Server library. Ideal for creating an FTP server on various devices (esp8266, esp32, Arduino Ethernet, WiFi NiNa etc) and filesystems (FAT, SPIFFS, LittleFS etc.). Here is the guide to use this library on Wio Terminal.
