ESP32-CAM: high resolution pinout and specs
ESP32 CAM high resolution draw of pinout and specs
Category: Tutorial
ESP32-CAM: pinout, specs and Arduino IDE configuration – 1
ESP32, a little guide on how to use this low-cost but powerful microcontroller with WIFI integrated.
Pinout, specification, and IDE configuration to start using your ESP32-Cam.
Ciclop 3D scanner: components testing and calibration – 4
Continue the tutorial on “how to build a Ciclop 3D scanner”, in the previous articles we have build the component and assembly they, now we start calibration and testing.
Ciclop 3D scanner: assembling electronic and wiring – 3
After assembling the basic mechanical components it is now time to assemble and connect all the electronic parts. The assembly documents have disappeared from the net so I’m going to add the documents to this article.
Ciclop 3D scanner: production and assembly of the control PCB – 2
In this article I would like to show my custom PCB for the Ciclop 3D scanner which is fully compatible with the original ZUM.
Ciclop 3D scanner: component printing and assembly – 1
I’d like to build the famous Ciclop 3D scanner.
In this article I enter all the steps for 3D printing and assembling the structure, I have made some corrections to simplify the process.
SSD1306 OLED Display: draw images, splash and animations – 2
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We will now render images and create a simple animation and take a look at the byte array generator.
Wio Terminal: pinout, specs and Arduino IDE configurations – 1
Wio Terminal is a complete system, compared to a normal development board it is equipped with screen + development board + input / output interface + container, which makes it an efficient product and ready for the final product.
Here my introduction and briefly how to use tutorial.
SDD1306 OLED display: wiring and basic use with esp8266, esp32 and Arduino – 1
SSD1306 IC is used for the most commons OLED display is a single-chip CMOS OLED/PLED driver with controller for organic / polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 64 commons.
We are going to use it with SPI and i2c and learn the basic function.
Arduino SAMD NINA: pinout, specs and Arduino IDE configuration – 1
The new generation of Arduino’s board is very interesting. Powerful CPU and high level connectivity, dedicated cryptography chip to manage all IoT environment. But become also more complex than previous boards.
