Arduino Nano: high-resolution pinout, datasheet and specs
The Arduino Nano is a small, yet powerful development board that is based on the ATmega328P microcontroller. It is the perfect choice for projects that require a compact form factor without compromising on performance. The Nano offers a wide range of features and capabilities, making it suitable for both beginners and advanced users.
Here Nano device Arduino UNO - Arduino MEGA 2560 R3 - Arduino Nano - Arduino Pro Mini
The Arduino Nano is a compact and versatile microcontroller board based on the ATmega328P. It offers various functionalities through its pins and technical features.
Pinout Configuration
- Power: Vin (6-12V input), 3.3V (50mA max), 5V, and GND.
- Reset: Resets the microcontroller.
- Analog Pins (A0 – A7): For measuring 0-5V analog voltage.
- Digital Pins (D0 – D13): Serve as input or output; operate at 0V or 5V.
- Serial (Rx, Tx): For TTL serial data transmission and reception.
- External Interrupts (2, 3): Trigger interrupts.
- PWM (3, 5, 6, 9, 11): Provide 8-bit PWM output.
- SPI (10, 11, 12, 13): For SPI communication.
- Inbuilt LED (13): Controls an inbuilt LED.
- IIC (A4, A5): For TWI communication.
- AREF: Reference voltage for input voltage.
Technical Specifications
- Microcontroller: ATmega328P (8-bit AVR family).
- Operating Voltage: 5V.
- Recommended Input Voltage for Vin pin: 7-12V.
- Analog Input Pins: 6 (A0 – A5).
- Digital I/O Pins: 14 (6 provide PWM output).
- DC Current on I/O Pins: 40 mA.
- DC Current on 3.3V Pin: 50 mA.
- Flash Memory: 32 KB (2 KB for Bootloader).
- SRAM: 2 KB.
- EEPROM: 1 KB.
- Frequency (Clock Speed): 16 MHz.
- Communication: IIC, SPI, USART.
How To
- Arduino Remote/wireless Programming
- BMP280, DHT11 and DHT22, DHT12, Dallas Temperature ds18b20, Thermistor
- ATtiny Programmer Board (ArduinoUNO As ISP)
- Send email with esp8266 and Arduino (Library v1.x)
- How to use SD card with esp8266 and Arduino
- Ebyte LoRa E32 device for Arduino, esp32 or esp8266: WOR (wake on radio) microcontroller and new Arduino shield
- Manage JSON file with Arduino, esp32 and esp8266
- How to interface Arduino, esp8266 or esp32 to RS-485
- Send emails with attachments (v2.x library): Arduino Ethernet
- WebSocket
- Arduino AVR: compiled binary (.hex) from command line and GUI tool
- Arduino: fast external SPI Flash memory
- GY-291 ADXL345 i2c spi accelerometer with interrupt for esp32, esp8266, stm32 and Arduino
- i2c Arduino: how to create network, parameters and address scanner
- GY-273 QMC5883L clone HMC5883L magnetometer for Arduino, esp8266 and esp32
- WiFi remote debugging of an Arduino with DT-06
- Program Arduino UNO Remotely via WiFi with DT-06 ESP-Link Firmware
- Introduction to Remote Programming of Arduino UNO via WiFi with ESP8266
Datasheet
Arduino Nano Datasheet
Arduino Nano schematics
Arduino Nano board size
Thanks
- Arduino
- esp8285
- esp8266
- ESP32
- ESP32 s2
- ESP32c3
- ESP32s3
- VCC-GND Studio YD-ESP32-S3
- ESP32-S3 DevKitC 1
- WeAct ESP32 S3 A
- WeMos LOLIN S3
- WeMos LOLIN S3 Pro
- Arduino SAMD
- STM32
- Raspberry Pi